| Bi-Component Ink. Need to add hardener to make the ink adhere. Ink and hardener proportion is 7:3 |
Used on metal, coating and glass. Need high tempture baking at 120 degree/30minutes to adhere the ink on object. If the ink color is white, pay attention to the bake degree as the color might turn yellow if it is over 100 degree.
| EPOXY1300 |
| Mono-Component Ink, already has "Inert hardener" inside. |
Used on metal, coating and glass. Need high tempture baking at 160 degree/20minutes to adhere the ink on object.
| VIC |
| Can be either Mono or Bi component ink. Hardener is optional. If adding the hardener, the proportion is 10:1 |
Note that the ink after mixing, it will become like "jelly after 6-8 hours under the normal temperature.
Used on PP, PE, ABS, Acrylic, Nylon.
It dries faster than Epoxy 1000 and 1300 series.
|Sorry, sekarang masih belum ada data maaf|